Sage Green
Brick Red
Ranch #9CA897 #8B3A2A

Ranch House: Sage Green + Brick Red Door

Sage Green Ranch with brick red door accent....

Before / After Preview

Before - facade without Sage Green + Brick Red (Ranch)
Before
After - facade in Sage Green () with Brick Red on the front door (Ranch)
After

Understanding This Color Harmony

Sage Green Ranch with brick red door accent.

Technical Color Details

Property Facade Front door
Color Name Sage Green Brick Red
HEX #9CA897 #8B3A2A
RGB 156, 168, 151 -
RAL -
Element Walls / Facade Front door
Style Ranch
Sage Green
#9CA897
Brick Red
#8B3A2A

Colour Technical Profile

LRV
64.4
Hue
102°
Saturation
9%
Lightness
63%

In HSL coordinates, Sage Green sits at hue 102°, saturation 9%, and lightness 63%. That places it among the neutral tones with very low saturation, close to the RAL reference . US exterior lines such as Sherwin-Williams Duration, Benjamin Moore Aura Exterior, Behr Marquee carry close matches across their 100% acrylic and elastomeric ranges; ask your paint store for a computer-tinted match to the #9CA897 HEX value.

The Light Reflectance Value (LRV) calculates to 64.4 using the WCAG relative-luminance formula (0.2126·R + 0.7152·G + 0.0722·B). LRV drives two practical outcomes for any exterior: how much solar heat the walls absorb, and whether the colour is compatible with exterior insulation finish systems (EIFS in the US, external wall insulation in the UK). At LRV 64.4 the facade reflects most incident light - a plus for cooling loads in hot climates, but watch for glare on south-facing elevations and gradual yellowing. Choose a paint with high titanium-dioxide load and strong UV inhibitors.

The mathematical complement (180° across the hue wheel) lands on a plum violet - best reserved for a small accent such as a door or mailbox rather than the main field. The existing accent of Brick Red (#8B3A2A) sits at a controlled contrast ratio that grounds the composition without breaking it up.

Expert Tips

Brick red door pops against sage.

Common Mistakes to Avoid

Avoid bright sage, stay muted.

Ideal Home Styles

Ranch 1960s-70s suburban single-story

Where This Combination Works Best

Architectural Match

The Ranch style is tailored to the following home types: Ranch, 1960s-70s suburban, single-story. On modern farmhouses with board-and-batten siding, Craftsman bungalows with deep eaves, and mid-century ranches with long horizontal sight lines, this palette plays to each form's strengths without forcing a period look.

Climate & Orientation

With an LRV of 64.4, this is a highly reflective colour: excellent for hot climates (Sun Belt, desert Southwest, Florida) where it materially reduces cooling loads. Guard against glare on south elevations and inspect shaded walls annually for algal streaking.

Urban & Regulatory Context

Before painting, check your HOA covenants - an estimated 60% of new US homes are governed by HOA rules, and many require Architectural Review Board (ARB) approval for exterior colour changes, with approved palettes limited to 15-30 pre-selected swatches. In designated historic districts, a Certificate of Appropriateness from the local preservation commission is often required in addition. This ranch palette is broadly consistent with neighbourhood-friendly suburban expectations, but always submit paint chips and a written description to your HOA before ordering materials - retroactive enforcement can require repainting at the homeowner's expense.

Frequently Asked Questions

What colors are used in this combination?

This combination pairs Sage Green (#9CA897, ) on the walls with Brick Red (#8B3A2A) on the front door. The style is Ranch.

What style of home suits this combination?

This color scheme is ideal for: Ranch, 1960s-70s suburban, single-story.

How can I test this combination on my home?

Upload a photo of your facade to FacadeColorizer and apply these exact colors using our AI-powered simulator. It takes less than 30 seconds and is free to try.

What are the RAL and HEX references for these colors?

The facade color Sage Green has the reference (HEX: #9CA897, RGB: 156, 168, 151). The accent color Brick Red has the HEX code #8B3A2A.

Ready to See This Combination on Your Home?

Upload a photo of your facade and apply Sage Green + Brick Red in seconds with our AI simulator.

Try the Free Simulator

No sign-up required • 1 HD sim + 3 variations free