Benjamin Moore Ultra Spec 500 is the contractor line in the brand's interior range: five sheens, a matching primer, and a zero VOC wording printed on its sheets. The product pages describe it as built for high-volume painting contractors, and the data sheets name commercial and institutional rooms as its main setting. This page covers the finishes, the figures printed on the sheets, what the zero VOC wording covers, and how the eggshell compares with Regal Select, ben and Scuff-X on their own sheets. Every figure was read on the Benjamin Moore product pages and data sheets on November 19, 2026. No price appears here, because the product pages publish none.
Opens the interior tool with the Benjamin Moore palette and "Walls" preselected. How it works: our interior paint visualizer page.
What Ultra Spec 500 is, and who it is built for
Ultra Spec is Benjamin Moore's line for painting contractors. Ultra Spec 500 is its waterborne acrylic interior range, tinted on the Gennex zero VOC colorant system. The Eggshell product page calls it a "professional-quality, Zero-VOC interior coating designed to meet the needs of professional painting contractors", and the brand page uses the same description for the range as a whole.
The sheets give the same surfaces for every finish: drywall, masonry, plaster and wood, for interior use. The Eggshell sheet describes its usage as "interior wall and ceiling surfaces in commercial and institutional environments where an eggshell finish is desired". The product pages also carry a residential segment and five project types: basement, bedroom, garage, kitchen and living room. The line is built for contractors, but the printed use is not limited to commercial buildings.
The five finishes and the primer, by product number
Each product has a code that appears in its product page address and in the title of its sheet. The brand page lists these six items as the Ultra Spec 500 range:
- Eggshell, product T538
- Low Sheen-Eggshell, product T537
- Flat, product T535
- Satin/Pearl, product T545
- Semi-Gloss, product T546
- Ultra Spec 500 Interior Latex Primer, product N534
Order by code, and check the sheet title against it before you buy. The primer is listed on the same brand page as the five finishes.
Specifications by finish, as printed
The table reads the values printed on the sheets. Coverage comes from the product pages, and wet film from the sheets. Gloss is read at 85 degrees for the flat, low sheen, eggshell and primer rows, and at 60 degrees for the satin and semi-gloss rows, the angle each sheet prints.
| Finish (code) | Volume solids | Gloss reading | Touch dry | Recoat | Coverage (sq ft/gal) | Wet film (mils) |
|---|---|---|---|---|---|---|
| Eggshell (T538) | 42 ± 2% | 20 to 25 at 85° | 2 hours | 2 to 3 hours | 400 to 450 | 3.6 to 4.0 |
| Low Sheen-Eggshell (T537) | 41 ± 2% | 15 to 20 at 85° | 1 hour | 2 to 3 hours | 400 to 450 | 3.6 to 4.0 |
| Flat (T535) | 42 ± 2% | 0 to 2.5 at 85° | 1 hour | 2 to 3 hours | 400 to 450 | 3.6 to 4.0 |
| Satin/Pearl (T545) | 39.6 ± 2% | 20 to 35 at 60° | 2 hours | 4 hours | 400 to 450 | 3.9 to 4.3 |
| Semi-Gloss (T546) | 37.9 ± 2% | 45 to 55 at 60° | 2 hours | 4 hours | 400 to 450 | 3.9 to 4.2 |
| Primer (N534) | 30 ± 2% | 3 to 8 at 85° | 1 hour | 2 to 3 hours | 350 to 400 | 4.0 to 4.6 |
Try it on your room
- 1Your photoPhoto
- 2Your colorColor
- 3HD render in ~30 sHD render in ~30 s
Your photo is used only to create your preview. JPG, PNG, HEIC (iPhone)
Dry and recoat times are the sheet figures at 77 degrees F and 50 percent relative humidity. The Eggshell sheet adds that high humidity and cool temperatures lengthen the dry, recoat and service times. The product pages give an application range of 50 to 90 degrees F.
The Satin/Pearl and Semi-Gloss sheets carry the print code 062321, while the Eggshell, Low Sheen-Eggshell and Flat sheets carry 012725. Because the codes differ, check the current sheet for the satin and semi-gloss rows before you rely on their figures. Every value above was read on November 19, 2026.
Zero VOC: what the wording covers
The product pages list Zero VOC among their feature labels and read "VOC compliant in all areas" under compliance. The Eggshell sheet prints the VOC content as "Zero g/L". The Satin/Pearl and Semi-Gloss sheets add "Zero VOC post tint (any base and any color)", and the Satin/Pearl sheet says that every Ultra Spec 500 finish can be had in any color "without an increase in VOC". The claim is therefore written for the finished paint after tinting, not for the base alone.
A zero VOC figure describes the coating, not the room. The EPA's page on volatile organic compounds notes that paints, varnishes and wax all contain organic solvents, and it advises: "Increase ventilation when using products that emit VOCs." Ventilation stays a separate step during application and drying, whatever the label says. For a wider comparison of low-VOC brands, the low-VOC paint guide on this site covers other lines.
The sheets list two checks that sit apart from the VOC figure. The Eggshell sheet lists CDPH Emissions Certified and eligibility for the CHPS low emitting credit, and says the product "has been tested by independent third parties and meets or exceeds the published chemical restriction and performance criteria of the Green Seal GS-11 2015 standard". Green Seal's page for that standard, GS-11 Paints, Coatings, Stains, and Sealers, sets VOC content limits for each product category, with the California Air Resources Board limits as its reference.
Regional rules are a third layer. Rule 1113, Architectural Coatings, of the South Coast Air Quality Management District covers the content of architectural coatings used in its district. Check the rule for the limits that apply where you paint before you rely on any label, this one included.
Primer on new surfaces
The Eggshell sheet says new surfaces should be fully primed, and that previously painted surfaces may be primed or spot primed as necessary. For drywall and cured plaster, the sheet names Ultra Spec 500 Interior Latex Primer (N534) among its primer options. The primer's own sheet gives 30 plus or minus 2 percent volume solids, 350 to 400 square feet per gallon, a wet film of 4.0 to 4.6 mils and a dry film of 1.2 to 1.4 mils.
Coverage is lower for the primer, 350 to 400 square feet per gallon against 400 to 450 for the topcoats, so the gallon count changes when a primer coat goes on first. The Eggshell sheet also advises tinting the primer toward the shade of the finish coat, "especially when a significant color change is desired". For a general guide to choosing a primer, see the interior paint primer guide.
Eggshell against Regal Select, ben and Scuff-X
Eggshell is the one sheen all four lines share, so the table compares only those four eggshell sheets. Coverage is 400 to 450 square feet per gallon on all four, so coverage does not separate them.
| Line (sheet code) | Volume solids | Gloss at 85° | Touch dry | Recoat | Dry film (mils) |
|---|---|---|---|---|---|
| Ultra Spec 500 Eggshell (T538) | 42 ± 2% | 20 to 25 | 2 hours | 2 to 3 hours | 1.5 to 1.7 |
| Regal Select Eggshell (N549) | 45 ± 2% | 15 to 22 | 1 hour | 1 to 2 hours | 1.6 to 1.8 |
| ben Eggshell (N626) | 39 ± 2% | 15 to 22 | 1 hour | 2 hours | 1.4 to 1.6 |
| Scuff-X Eggshell (N485) | 41 ± 2% | 15 to 25 | 1 hour | 2 to 3 hours | 1.5 to 1.7 |
Three differences show on the sheets. First, the sheet titles: the Regal Select sheet presents a premium interior paint and primer that is self-priming on most surfaces, and the ben sheet presents a premium interior acrylic paint and primer with "Zero VOC, Low Odor" among its features. Ultra Spec 500 and Scuff-X both list N534 among their primer systems. Second, the drying schedule: Regal Select touches dry in 1 hour and recoats in 1 to 2 hours, while Ultra Spec 500 Eggshell takes 2 hours to touch and 2 to 3 hours to recoat. Third, the solids: Regal Select's 45 percent is the highest of the four sheets and ben's 39 percent the lowest. Volume solids are a sheet figure. None of the four sheets gives a scrub-cycle count: they use "scrubbability" as a performance word, with no number attached, so durability claims stay with the manufacturer's own wording.
The Scuff-X review on this site sets out that line's scuff claims in full, and this page does not repeat them: the Scuff-X review is the place for that comparison. The Aura review covers Benjamin Moore's Aura line, which sits outside this comparison.
Which jobs the line fits, and where another line may fit better
The product pages place Ultra Spec 500 with high-volume painting contractors. The Semi-Gloss product page calls its finish "durable and uniform", and the Semi-Gloss sheet describes a washable finish for commercial and institutional spaces. For a crew that repaints many rooms on a schedule, the sheets supply the figures a bid needs: coverage, recoat time, and the primer rule for new surfaces.
A home job reads differently. On a sound wall that was painted before, the sheets point to a paint that primes itself, and Regal Select's sheet describes exactly that on most surfaces. A hallway with heavy scuffing is a case for the Scuff-X review instead, which explains that line's claims. The sheen should follow the room and the wear it gets, and the number to compare is the gloss reading at the angle the sheet prints, not the sheen name alone.
Application, thinning and cleanup, from the sheet
The product pages list brush, roll and spray as application methods, with an application range of 50 to 90 degrees F. The Eggshell sheet gives airless spray settings of 1,500 to 2,500 PSI with a 0.013 to 0.017 tip. It says conditioning with Benjamin Moore 518 Extender may be needed to adjust open time or spray characteristics. Thinning is limited: the sheet allows a maximum of 8 fluid ounces of 518 Extender or water per gallon, and says never to add other paints or solvents.
Cleanup is soap and water for brushes, rollers and tools. The sheet adds that spray equipment should get a final rinse with mineral spirits to prevent rusting. The recoat times in the table apply to a second coat. The washing wait is a separate figure: the Eggshell sheet says painted surfaces can be washed after two weeks.
Custom colors and deep bases
The Eggshell sheet notes that certain custom colors require a Deep Color Base primer, tinted to a special prescription formula to reach the desired color, and asks the buyer to consult the retailer. Ask the store whether your shade needs that base before you buy the topcoat, not after the first coat has gone on.
Health and safety lines from the Eggshell sheet
The sheet's environmental, health and safety block asks for use only with adequate ventilation, advises against breathing spray mist or sanding dust, and calls for fresh air during application and drying. Its lead warning says that scraping, sanding or removing old paint may release lead dust. When old paint is disturbed, the sheet calls for a NIOSH approved respirator, and for cleanup with a HEPA vacuum and a wet mop.
How to read a sheet before you order
- Find the finish by its code, then compare the gloss reading at the angle the sheet prints.
- Check touch dry and recoat against your schedule. At 77 degrees F, the flat and low sheen dry to touch in 1 hour, the eggshell in 2 hours, and the satin and semi-gloss need 4 hours before a second coat.
- Estimate gallons with the coverage range, adjusted for surface texture and porosity, as the sheet advises.
- Check the primer rule for each surface. On new surfaces the Eggshell sheet says the wall should be fully primed.
- Compare the print code on the sheet you are given with the codes in this article.
Questions to ask the store
The sheets leave some decisions to the retailer, so five questions are worth asking before the order is placed:
- Is this the current sheet for the finish and code I am ordering? The print codes differ between the sheets read for this page.
- Does my shade need the Deep Color Base primer? The Eggshell sheet says certain custom colors do.
- Which primer fits new drywall or cured plaster? The sheet names N534 among its options.
- How much paint do my rough or porous walls need? The sheet asks for an estimate that reflects surface texture and porosity.
- When can I recoat, and when can the wall be washed? Recoat takes 2 to 4 hours by finish, and the Eggshell sheet gives two weeks before washing.
Where to buy Ultra Spec 500
The product pages read "Non-purchasable online, contact store for availability", and their store finder points to locally owned retailers. Buy through an independent Benjamin Moore retailer, and ask for the current sheet of the finish you pick. The pages show no price, so this page quotes none. Check any store quote against the sheet figures above before you compare brands.
Color first, then the can
Choose the color on your own room before you choose the finish. The interior paint visualizer page explains the tool, and the button at the top of this page opens it with the Benjamin Moore palette. Then pick the finish from the table, using the traffic and cleaning your room gets.
Preview Ultra Spec 500 shades on your walls
Upload a photo of the room and try Benjamin Moore colors on the walls before you order.
Try Benjamin Moore colors on my wallsSources and references
- Benjamin Moore, Ultra Spec 500 Interior Paint brand page and Eggshell product page, T538: range, feature labels, coverage, dry and recoat times, compliance wording, usage and availability, read November 19, 2026.
- Benjamin Moore, technical data sheets: Eggshell T538, Low Sheen-Eggshell T537, Flat T535, Satin/Pearl T545, Semi-Gloss T546 and Interior Latex Primer N534: volume solids, gloss, film thickness, drying, VOC and compliance wording.
- Benjamin Moore, eggshell comparison sheets: Regal Select Eggshell N549, ben Eggshell N626 and Scuff-X Eggshell N485.
- U.S. EPA, Volatile Organic Compounds' Impact on Indoor Air Quality: organic solvents in paints and the advice to increase ventilation.
- Green Seal, GS-11 Paints, Coatings, Stains, and Sealers: VOC content limits by product category.
- South Coast Air Quality Management District, Rule 1113, Architectural Coatings.
Frequently asked questions
Is Benjamin Moore Ultra Spec 500 zero VOC?
Which finishes does Ultra Spec 500 come in?
How many square feet does a gallon of Ultra Spec 500 cover?
How long does Ultra Spec 500 take to dry and recoat?
Do I need a primer before Ultra Spec 500?
Where can I buy Ultra Spec 500?
Trademarks mentioned (Sherwin-Williams, Benjamin Moore, Behr, Caparol, Brillux, Sto, Alpina, Valspar, PPG, Glidden, Dulux, Crown Trade, Sandtex, Farrow & Ball, Johnstone's, Leyland) are property of their respective owners. FacadeColorizer is independent and not affiliated with any of them. Nominative fair use under Lanham Act §1125.