Benjamin Moore Scuff-X (products N484 to N487) is a one-component interior latex paint engineered for high-traffic commercial spaces, such as school hallways, hotel lobbies and stairwells, and sold in four sheens: Matte, Eggshell, Satin and Semi-Gloss. The current data sheets list 400 to 450 sq ft per gallon, touch dry in 1 hour and recoat in 2 to 3 hours (2 and 4 hours for the Semi-Gloss), VOC under 50 g/L, and washing after two weeks. In a home, it earns its place on the walls that get rubbed every day: hallways, stairwells, mudrooms, kids' rooms. Three limits to know before you buy: it is not sold as a paint and primer (new surfaces are primed first), Benjamin Moore publishes no scrub-cycle figure for it and no price on its US site, and for a steamy bathroom or furniture-smooth cabinets the brand makes other products.
How this page works: every figure comes from the makers' data sheets and product pages and from the EPA, read on November 14, 2026. Calculations are ours and labeled as such. No paint was applied for this page.
Opens the interior tool with the Benjamin Moore palette and "Walls" preselected. How it works: our interior paint visualizer.
What Scuff-X is, and why you also see "Ultra Spec Scuff-X"
Benjamin Moore introduced Scuff-X on May 31, 2017, inside its Ultra Spec line for commercial contractors, in three sheens: Matte, Eggshell and Satin (launch press release). A Semi-Gloss with a chip-resistance technology called Chip-Tech was added afterwards. The pitch has not changed: a single can that resists scuff marks better than the two-component coatings specified for high-traffic areas, without their pre-mixing and short pot life.
Older documents (the 2019 brochure, the 2020 Satin and Semi-Gloss sheets) are titled "Ultra Spec Scuff-X" (codes 484 to 487). The current data sheets, dated February and April 2025, are titled simply "Scuff-X" and carry the codes N484 to N487. Same product family, but the published figures changed between the two generations. This page uses the current sheets: Matte N484, Eggshell N485, Satin N486 and Semi-Gloss N487.
The four Scuff-X sheens on their data sheets
| Spec | Matte N484 | Eggshell N485 | Satin N486 | Semi-Gloss N487 |
|---|---|---|---|---|
| Gloss reading | 8 to 15 at 85° | 15 to 25 at 85° | 20 to 35 at 60° | 40 to 60 at 60° |
| Volume solids | 40% ± 2 | 41% ± 2 | 41% ± 2 | 38% ± 2 |
| Dry film per coat | 1.4 to 1.6 mils | 1.5 to 1.7 mils | 1.5 to 1.6 mils | 1.3 to 1.5 mils |
| Touch dry / recoat (77°F, 50% RH) | 1 h / 2 to 3 h | 1 h / 2 to 3 h | 1 h / 2 to 3 h | 2 h / 4 h |
| Uses named on the sheet | Walls; "great for hiding surface imperfections" | Hallways, fitting rooms and waiting areas | Interior doors, trim, cabinets and walls | Door jambs, trim and baseboards, columns, window trim, hallways and stairwells |
Try it on your room
- 1Your photoPhoto
- 2Your colorColor
- 3HD render in ~30 sHD render in ~30 s
Your photo is used only to create your preview. JPG, PNG, HEIC (iPhone)
Common to the four: 400 to 450 sq ft per gallon, VOC under 50 g/L, a proprietary acrylic copolymer binder, "painted surfaces can be washed after two weeks", antimicrobial additives that inhibit mold and mildew on the paint film, and the same certifications (LEED v4 eligible, CDPH emissions certified).
The Scuff-X Matte is not a dead-flat paint: at 8 to 15 gloss units it sits above Regal Select Matte (3 to 5) and Aura Matte (3 to 6). And the Semi-Gloss is the outlier: lowest solids, thinnest film, slowest to dry, and the only one with Chip-Tech, a blend of toughness and flexibility meant for "glancing blows and irregular hits". It is a trim paint more than a wall paint. Our interior paint finish guide covers sheens in general.
Three figures that circulate and no longer match the sheets
- "350 to 400 sq ft per gallon." That is the figure of the earlier Ultra Spec Scuff-X sheets and of the 2019 product brochure, and Benjamin Moore's Scuff-X overview page still quotes it. The current sheets and product pages say 400 to 450 sq ft, at 3.6 to 4.0 mils wet.
- "Dry in 1 hour, recoat in 2 to 3 hours." True for Matte, Eggshell and Satin. The Semi-Gloss takes 2 hours to the touch and 4 hours to recoat.
- "Under 100 g/L VOC." That was the 2019 brochure for Matte, Eggshell and Satin. All four current sheets say under 50 g/L.
What "scuff-resistant" means on paper, and what is not published
A scuff is the dark mark left when a shoe, a bag or a chair back rubs a wall. Benjamin Moore's claim is a "patented scuff-resistance formula" with "superior durability and scuff-resistance than traditional high-performance two-component coatings"; the overview page adds that soap and water remove most blemishes.
The evidence published is Benjamin Moore's own testing: side-by-side boards in the brochure captioned "representative results; actual results may vary", and, for Chip-Tech, steel nuts dropped from varying heights on painted panels. What the sheets do not contain: no scrub-cycle count, no abrasion figure, no warranty statement. The Sherwin-Williams rival compared below is equally silent. "Scuff-resistant" is a manufacturer's claim backed by internal tests, not a number you can line up across brands. Hence this page compares what is measurable.
The usual rule ties scuff resistance to sheen: Sherwin-Williams' paint sheen guide says flat paint "is prone to scuffs and stains" and sends hallways and children's bedrooms to satin. The point of Scuff-X is to offer that protection in a Matte and an Eggshell as well.
What Scuff-X is used for at home, and where another paint fits better
The data sheets speak to facility managers. But Benjamin Moore's product pages list the segments as "Residential, Commercial" and name home projects, from basement and bedroom to door and trim. A house has its own high-traffic zones:
- Hallways and stairwell walls, both named on the sheets. Eggshell is the sheet's own suggestion for hallways.
- Mudrooms and the entry from the garage. Colors that hide dirt are in our durable mudroom paint colors guide.
- Kids' bedrooms, playrooms and basement rec rooms. Our reading: the wear of a school corridor, at a smaller scale.
- Door frames, baseboards and stair trim, in Semi-Gloss or Satin. The method is in our guide on how to paint interior doors, trim and baseboards.
And the cases where Benjamin Moore has a product built for the job:
- A bathroom with a daily shower. The Scuff-X sheets mention bathrooms and a mildew-resistant film, but say nothing about steam or surfactant leaching. The line written for humid rooms is in our Benjamin Moore Aura Bath & Spa review.
- Kitchen cabinets and furniture. Benjamin Moore's cabinet enamel is Advance, compared further down.
- Low-traffic rooms. An adult bedroom or a ceiling does not use what Scuff-X is made for; Regal Select or Aura prime themselves and recoat faster.
- Floors and anything outdoors. The overview page states that Scuff-X is not recommended for floors and is for interior use only.
Do you need to prime before using Scuff-X?
On a sound, previously painted wall: usually not. On anything new or bare: yes. Unlike Regal Select and Aura, whose data sheets are titled "Paint & Primer", Scuff-X is not presented as self-priming. Its sheets set the rule: new surfaces should be fully primed, and previously painted surfaces may be primed or spot primed as necessary.
| Surface or condition | What the Scuff-X data sheets ask for |
|---|---|
| Previously painted wall in sound condition | No full prime; prime bare areas only |
| New drywall | Ultra Spec 500 Interior Latex Primer (N534), or a first coat of Scuff-X itself |
| Wood and engineered wood | N534 or Fresh Start Undercoater and Primer/Sealer (032) |
| Water stains, smoke, grease, very slick surfaces | A special purpose primer: ask the retailer |
| Strong color change, certain custom colors | Primer tinted toward the finish color; a Deep Base Primer for some deep colors |
Drywall is the one surface where Scuff-X can serve as its own first coat. A hallway repaint in a similar color is a two-coat job without primer; a new addition or bare wood trim starts with a primer. Our interior primer guide compares the options.
Prep, application and the two-week rule
- Clean first. The surface must be free of dirt, grease, soap, wax, scaling paint and mildew.
- Dull the gloss and feather the chips. If paint is letting go in sheets, read our page on interior paint peeling off walls first.
- Mind old paint. The EPA says a home built before 1978 may have lead-based paint and that sanding or scraping it can easily create dangerous lead dust: follow its lead-safe practices for do-it-yourselfers.
- Apply one or two coats, generously, between 50 and 90°F, with a nylon/polyester brush and a quality roller, "from unpainted area into wet area". Thin only if needed: up to 8 fl oz of Benjamin Moore 518 Extender or water per gallon.
- Ventilate. Under 50 g/L is low, not zero. The EPA advises more ventilation when using products that emit VOCs (EPA, VOCs and indoor air quality); see our low-VOC interior paint guide.
The two-week rule. A second coat is possible after 2 to 3 hours, but the film is not finished: the current sheets say painted surfaces can be washed after two weeks. The earlier Ultra Spec Scuff-X Satin sheet (October 2020) was more direct: the paint "needs to fully cure for 2 weeks" before any cleaning chemicals and liquids are applied. Our reading for a house: keep backpacks, bikes and furniture off the fresh walls for two weeks. High humidity and cool temperatures lengthen these times; our interior paint drying time guide explains dry, recoat and cure.
How much Scuff-X a hallway, a mudroom or a kid's room takes
Three worked examples with 8 ft ceilings, walls only, two coats, at 400 to 450 sq ft per gallon (our calculations; a door opening is counted at 21 sq ft, a window at 15 sq ft):
| Room | Wall area, one coat | Two coats | Gallons needed | Buy |
|---|---|---|---|---|
| Mudroom, 6 by 8 ft, two doors | 182 sq ft | 364 sq ft | 0.8 to 0.9 | 1 gallon |
| Hallway, 4 by 20 ft, five doors | 279 sq ft | 558 sq ft | 1.2 to 1.4 | 2 gallons |
| Kid's bedroom, 10 by 12 ft, one door, one window | 316 sq ft | 632 sq ft | 1.4 to 1.6 | 2 gallons |
Scuff-X was launched in gallons and five-gallon pails, so a hallway usually leaves part of a second gallon: keep it for touch-ups. A stairwell is harder to estimate because of the sloped wall; measure it with our interior paint coverage calculator guide. For labor and budgets, see the interior house painting cost guide.
Two gallons, one color: choose it on your own hallway first
Upload a photo of the hallway or the mudroom and compare Benjamin Moore colors on your own walls before the store tints the cans.
Try Benjamin Moore colors on my wallsScuff-X vs Regal Select vs Aura: the eggshells side by side
The three eggshells, from the Scuff-X N485 sheet, the Regal Select Eggshell N549 data sheet and the Aura Eggshell N524 data sheet. Published specs, not painted walls.
| Spec (Eggshell) | Scuff-X N485 | Regal Select N549 | Aura N524 |
|---|---|---|---|
| Self-priming | No, except as a first coat on drywall | Yes, on most prepared surfaces | Yes, on most prepared surfaces |
| Volume solids | 41% ± 2 | 45% ± 2 | 46% ± 2 |
| Spread rate per gallon | 400 to 450 sq ft | 400 to 450 sq ft | 350 to 400 sq ft |
| Dry film per coat | 1.5 to 1.7 mils | 1.6 to 1.8 mils | 1.9 to 2.1 mils |
| Touch dry / recoat | 1 h / 2 to 3 h | 1 h / 1 to 2 h | 1 h / 1 h |
| Gloss at 85° | 15 to 25 | 15 to 22 | 10 to 22 |
| Gallon price on benjaminmoore.com, Nov 14, 2026 | Not shown | $84.99 | $108.99 |
Scuff-X is not "more paint" than the residential lines: it has the lowest solids of the three, Aura leaves about 25% more dry film per coat (2.0 mils against 1.6 at mid-range, our calculation), and it is the only one that needs a primer on new surfaces. What it adds is a single property, a scuff-resistance claim that the two other sheets do not make. Hence a simple rule: Scuff-X where the walls get hit and rubbed, Regal Select or Aura where they mostly get looked at. Our Benjamin Moore Aura Interior paint review details Aura, and the best interior paint brands page ranks the lines of each brand.
Doors, trim and cabinets: Scuff-X or Advance?
The Scuff-X Satin sheet names doors, trim and cabinets, in commercial settings, and claims block resistance and good flow and leveling. Advance is a different chemistry, a waterborne alkyd. Its Satin 792 data sheet promises "the desired flow and leveling characteristics of conventional alkyd paint", and pays for it in time: 4 to 6 hours to the touch, 16 hours before recoating, at least 5 to 7 days before shelves and tabletops return to service. Scuff-X Satin recoats in 2 to 3 hours. So: Scuff-X Satin or Semi-Gloss for door frames and baseboards that take knocks and must be back in use the same day; Advance for kitchen cabinets and furniture, where a leveled enamel matters more than speed. Details in our Benjamin Moore Advance cabinet paint review.
Scuff-X vs Sherwin-Williams Scuff Tuff
Sherwin-Williams sells a direct rival, Scuff Tuff Interior Waterbased Enamel. Figures: the Scuff Tuff Eg-Shel S24-150 product data sheet (May 2025) and the Scuff Tuff product page. For doors, trim and cabinets, the brand's ProClassic enamels are covered in our Sherwin-Williams ProClassic data sheet guide.
| Spec (eggshell) | BM Scuff-X N485 | SW Scuff Tuff S24-150 |
|---|---|---|
| Sheens in the line | Matte, Eggshell, Satin, Semi-Gloss | Flat, Matte, Eg-Shel, Semi-Gloss |
| Volume solids | 41% ± 2 | 37% ± 2 |
| Spread rate and dry film | 400 to 450 sq ft; 1.5 to 1.7 mils | 350 to 400 sq ft; 1.5 mils |
| Touch dry / recoat | 1 h / 2 to 3 h | 2 h / 4 h |
| System on new drywall | Primer N534, or Scuff-X as its own first coat | 1 coat of primer, then 2 coats |
| Price on the maker's site, Nov 14, 2026 | Not shown | Not shown without signing in |
The two sheets describe the same kind of product: more abrasion resistance than a standard wall paint, an antimicrobial film, under 50 g/L. On the measurable lines Scuff-X is ahead on spread rate, solids and speed, and it offers a Satin; Scuff Tuff offers a Flat. Neither maker publishes a figure for the property both are named after. Our Sherwin-Williams vs Benjamin Moore interior comparison covers the two brands line by line.
How much does a gallon of Scuff-X cost?
Benjamin Moore does not say. On November 14, 2026, the four Scuff-X product pages on benjaminmoore.com showed no price and were marked "This item is currently unavailable"; the catalog page reads "Non-purchasable online, contact store for availability". Independent retailers set their own prices, so the only reliable figure is the quote from your local store.
Two anchors from the same site on the same day: Regal Select Eggshell at $84.99 a gallon and Aura Eggshell at $108.99. When you compare, add the primer if the surface is new: it is a separate purchase with Scuff-X.
Colors: the whole Benjamin Moore deck
Scuff-X is tinted from four bases with Gennex colorants, and the product pages list it in more than 3,500 colors: there is no reduced "commercial" palette. One caution from the sheets: certain deep custom colors need a Deep Base Primer made to a special formula, so ask the retailer when you order a navy or a charcoal. Starting points: the Benjamin Moore interior paint colors guide, and two color reviews at opposite ends of the lightness range, White Dove OC-17 and Hale Navy HC-154.
Is Scuff-X worth it, and where to buy it
- Worth it for hallways, stairwells, mudrooms and kids' rooms that you are tired of touching up, especially if you want a Matte or an Eggshell rather than a shiny wall.
- Worth it for door frames and baseboards that get knocked, in Semi-Gloss.
- Skip it in low-traffic rooms, where Regal Select or Aura give more film per coat and prime themselves.
- Skip it for a steamy bathroom or kitchen cabinets: see Aura Bath & Spa and Advance.
- Skip it if you need a number: there is no published scrub rating and no warranty statement.
Where to buy it. The data sheets send you to "your local authorized independent Benjamin Moore retailer". Use the Benjamin Moore store locator and call ahead: the site itself tells you to contact the store for availability.
See the color on your hallway before the cans are tinted
Pick a Benjamin Moore shade, upload one photo of the room and compare two or three finalists side by side in about 30 seconds.
Preview my walls in Benjamin Moore colorsSources and references
- Benjamin Moore, Scuff-X technical data sheets: Matte N484, Eggshell N485, Satin N486, Semi-Gloss N487: specs, uses, primer systems, application.
- Benjamin Moore, Scuff-X Interior Paint overview page and Scuff-X Matte product page: claims, home projects, availability on November 14, 2026.
- Benjamin Moore, launch press release, May 31, 2017, 2019 product brochure and earlier Ultra Spec Scuff-X Satin 486 data sheet (October 2020): history and earlier figures.
- Benjamin Moore, Regal Select Eggshell N549, Aura Eggshell N524 and Advance Satin 792 data sheets; product pages for Regal Select Eggshell and Aura Eggshell: prices on November 14, 2026.
- Sherwin-Williams, Scuff Tuff Eg-Shel S24-150 product data sheet and Scuff Tuff product page.
- Sherwin-Williams, Paint sheen guide.
- U.S. EPA, Lead-safe renovations for DIYers and VOCs and indoor air quality.
Frequently asked questions
Is Benjamin Moore Scuff-X worth it?
Do I need to prime before using Scuff-X?
What is Scuff-X used for?
How much does a gallon of Scuff-X cost?
How many square feet does a gallon of Scuff-X cover?
How long does Scuff-X take to dry and cure?
Which Scuff-X sheen should I choose?
Is Scuff-X better than Regal Select or Aura?
Trademarks mentioned (Sherwin-Williams, Benjamin Moore, Behr, Caparol, Brillux, Sto, Alpina, Valspar, PPG, Glidden, Dulux, Crown Trade, Sandtex, Farrow & Ball, Johnstone's, Leyland) are property of their respective owners. FacadeColorizer is independent and not affiliated with any of them. Nominative fair use under Lanham Act §1125.